Asus MAXIMUS VII HERO Manual page 114

CPU Graphics Memory [Auto]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by the
CPU graphics.
Configuration options: [Auto] [32M] [64M] [96M] [128M] [160M] [192M] [224M] [256M]
[288M] [320M] [352M] [384M] [416M] [448M] [480M] [512M]
Render Standby [Auto]
Allows you to enable the Intel
power use when the system is idle.
Configuration options: [Auto] [Disabled] [Enabled]
CPU Graphics Multi-Monitor [Disabled]
Enable this item for the Intel graphics render standby support to reduce the iGPU
power consumption when the system is idle. Configuration options: [Disabled]
[Enabled]
DMI Configuration
Enable this item for the DMI (Direct media interface) to run at PCI-E 2.0 speed.
DMI Gen 2 [Enabled]
Configuration options: [Enabled] [Disabled]
NB PCI-E Configuration
Allows you to configure the NB PCI Express settings.
PCIEx16_1/2 Link Speed [Auto]
Allows you to select the operating speed of the PCI-EX16_1 /2 speed.
Configuration options:
[Auto]
[Gen1]
[Gen2]
[Gen3]
Memory Configuration
Allows you to configure the memory configuration parameters.
Memory Scrambler [Enabled]
Allows you to enable or disable the Memory Scrambler support.
Configuration options: [Enabled] [Disabled]
Memory Remap [Enabled]
Allows you to enable remapping the memory above 4GB.
Configuration options: [Enabled] [Disabled]
3-34
Graphics Render Standby support to reduce iGPU
®
The system will automatically select the PCI-E x16 port speed.
The PCI-EX16 port will run at PCI-E 1.0 speed.
The PCI-EX16 port will run at PCI-E 2.0 speed.
The PCI-EX16 port will run at PCI-E 3.0 speed.
Chapter 3: BIOS setup