Table of Contents
Advertisement
USB 3.0 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) that automatically
speeds up the transfer rates of your USB storage devices.
Launching USB 3.0 Boost
To launch USB 3.0 Boost, click or tap
menu, then select USB 3.0 Boost.
Using the USB 3.0 Boost
Ensure to connect your USB 3.0 device to the USB 3.0 ports that support USB 3.0 Boost.
Refer to the Rear I/O connection section of your user guide for more details.
•
USB 3.0 Boost automatically detects the USB 3.0 devices that support UASP. For a
list of UASP-supported USB 3.0 devices, visit the ASUS website at www.asus.com.
•
The data transfer speed varies with USB devices. For a higher data transfer
performance, use a USB 3.0 device.
ASUS MAXIMUS VII HERO
on the top-right corner of the AI Suite 3 main
Click to select a USB device
Click to enable the USB
device's normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
4-13
Advertisement
Table of Contents
