Advertisement
Available languages
Available languages
FOR YOUR RECORDS
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the space
provided
below.
Refer to the model
and serial numbers
whenever you call upon your Kenwood dealer for information
of service on this product.
Model RA-9O
Serial number__—____»__
UNPACKING
Unpack
the
unit
carefully
and
make
sure
that
all
accessories and cables are put aside so they will not be lost.
Examine the unit for any possibility of shipping damage. If
your unit is damaged
or fails 10 operate, notify your dealer
immediately. If your unit was shipped to you directly, notify
the shipping company without delay. Only the consignee (the
person or company receiving the unit) can file a claim against
the carrier for shipping damage.
We
recommend
that you retain the original carton and
packing materials for use should you transport or ship the unit
in the future.
INSTALLATION PRECAUTIONS
(a)
Avoid locations subject to direct sunlight.
(b)
Avoid high or low temperature extremes
{c)
Keep the unit away frorn heat radiating sources.
(d) Choose a focation that is relatively free of vibration or
excessive dust.
(e) Make sure power is off before making any system con-
nections.
SAFETY PRECAUTIONS
CLEANING
Do not use volatile solvents such as alcohol, paint thinner,
gasoline, benzine, ete. to clean the cabinet.
Use a silicone
cloth or a clean dry cloth
SERVICE OR MODIFICATIONS
Do not remove the cabinet or touch internal parts. Refer all
service to qualified service personne. Unauthorized modifica-
tions can result in a dangerous shock hazard and can void the
warranty.
POWER CORD
Always insert or remove the power plug from the AC outlet
by grasping the plug body. Never pull or stretch the cord.
Take care that the cord is not subject to traffic or bent sharply
around furniture. Keep heavy objects off the cord; never route
it under rugs, and avoid the use of extra extension cords. At-
tention to these precautions will avoid fire or shock hazards.
IMPORTANT!
U.S.A. AND CANADA
Units shipped to the U.S.A,
and Canada are design-
ed for operation on 120 volts AC only. These units are
not equipped with an AC Voltage Selector switch and
the discussion of such a switch that follows should be
disregarded.
ALL OTHER COUNTRIES
Units shipped to countries other than the U.S.A. and
Canada are equipped with an AC Voltage Selector
switch on the rear panel
Refer to the following paragraph for the proper set-
ting of this switch
AC VOLTAGE SELECTION
This unit operates on
110-120 volts or 220-240 volts
AC. The AC Voltage Selector Switch on the rear panel is set to
the voltage that prevails in the area to which the unit is ship-
ped.
Before connecting the power cord to your AC outlet,
make sure that the setting position of this switch matches
your line voltage.
If not, it must
be set to your voltage in
accordance with the following direction.
Note:
ad
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC Voltage Selector Switch.
AC 110-120Vw-4® AC 220-240V~ AC 110-120V0
4m AC 220-2400
Switch lever
—
i)
o=—
®
This shows switch
This shows switch
lever is locked in
lever 1s locked in
220-240V~
110-129V~
position
position
Is
Move
switch
lever
to match
your
line
voltage with a small screw driver or other
pointed tool
AC Voltage Selector Switch
TO
PREVENT
FIRE
OR
SHOCK
HAZARD
DO
NOT
EXPOSE
THIS
APPLIANCE TO RAIN OR MOISTURE.
Ra-goim)
3
Advertisement
