Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Shark Cordless Detect Pro IW4000 Series
Summary of Contents for Shark Cordless Detect Pro IW4000 Series
- Page 1 Cordless Detect Pro ™ Vacuum IW4000 Series OWNER’S GUIDE...
-
Page 2: Important Safety Instructions
Pre-motor filter, and soft roller in place. paint, paint thinners, mothproofing Disconnect the battery pack from the Only use Shark® branded filters and substances, or flammable dust) appliance before making any adjustments, accessories. Failure to do so will void Turn off the vacuum before plugging in or changing accessories, or storing appliance. -
Page 3: Li-Ion Battery
Floor Nozzle NOTE: The Shark battery, like all lithium-ion batteries, will naturally decrease in capacity over time from the 100% capacity of NOTE: Once the charging post is installed, it can’t be removed. -
Page 4: Using Your Vacuum
USING YOUR VACUUM CHARGING CHARGING WHILE IN STORAGE MODE CONTROLS AND CLEANING MODES CONTACTS UPRIGHT DOCK CHARGING IW4625 SERIES POWER UPRIGHT HAND VACUUM RELEASE BUTTONS Charge the unit by placing it on the dock. Make To detach the hand vacuum from the wand, press When upright, the nozzle will lock to allow Press the button on the UI Screen to... -
Page 5: Above-Floor Cleaning
ABOVE-FLOOR CLEANING MAINTAINING YOUR VACUUM EMPTYING THE DOCK DUST BIN ABOVE-FLOOR WITH WAND ABOVE-FLOOR WITH HAND VACUUM Detach the hand vacuum to clean above- To detach the floor nozzle from the wand, floor areas. Press the front latch release step on the nozzle while pressing the button on the hand vac where it meets the nozzle release button at the bottom of The dock dust bin holds up to 30 days’... - Page 6 USING YOUR VACUUM MAINTAINING YOUR VACUUM USING THE AUTO-EMPTY DOCK CLEANING THE DUST CUP AND FILTER With the dust cup open and the power off, To deep-clean the dust cup, slide the release Place the vacuum on the dock in a downward Once evacuation is complete, the vacuum motion.
-
Page 7: Maintaining Your Vacuum
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CLEANING THE SENSORS CLEANING THE AUTO-EMPTY DOCK FILTERS Make sure to clean the Detect sensors Fig. 1 regularly, as hair and other debris may build up and obstruct them. If the sensors are partially obstructed, AUTO mode will not function as expected. -
Page 8: Troubleshooting
MAINTAINING YOUR VACUUM MAINTAINING YOUR VACUUM CHECKING FOR BLOCKAGES IN THE VACUUM TROUBLESHOOTING If you run over a hard or sharp object or notice a noise change while vacuuming, check for WARNING: To reduce the risk of shock and unintended operation, turn off blockages or objects caught in the brushroll. -
Page 9: Five (5) Year Limited Warranty
ADDITIONAL ACCESSORIES AVAILABLE ON SHARKACCESSORIES.COM Crevice Tool FIVE (5) YEAR LIMITED WARRANTY Duster Crevice Tool Upholstery Tool The Five (5) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja Wide Upholstery Tool Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable. - Page 10 TECHNICAL SPECIFICATIONS REGISTER YOUR PURCHASE Voltage: registeryourshark.com TWO (2) YEAR LIMITED BATTERY WARRANTY The Two (2) Year Limited Warranty applies to purchases made from authorized retailers of SharkNinja RECORD THIS INFORMATION Operating LLC. Warranty coverage applies to the original owner and to the original product only and is not transferable.
- Page 11 This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information. © 2024 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. DETECT PRO and LIGHT DETECT are trademarks of SharkNinja Operating LLC.
Need help?
Do you have a question about the Cordless Detect Pro IW4000 Series and is the answer not in the manual?
Questions and answers