Toyostove Laser 30 Type B Installation And Operation Instructions Manual page 24

5. Install the inner flue pipe.
a. For wall thickness 5-
From inside the room, insert the inner flue pipe through the hole. Make sure the arrow on the inner
flue pipe is pointing up. Secure the inner flue pipe to the wall with the three wood screws.
(See Fig. 7)
Inner flue pipe
Wood screws
b. For wall thickness 4" to 5-
In the event that the wall is too thin, use the spacer as indicated in Fig. 8.
When using the spacer, it may be hard to move the heater to the wall closely.
Inner flue pipe
Tapping screws
c. From outside, insert the outer flue pipe through the hole. Secure the outer flue pipe to the wall by
turning it clockwise. This locks the two halves together (See fig. 9).
NOTE: Make sure the arrow on the outer flue pipe flange is pointing up.
Make sure to secure the outer flue pipe well. (A-part shown in Fig. 9)
Inner flue pipe
3 / " to 9"
16
Arrow
3 / "
16
Arrow
Wood screws
Outer flue pipe
Outer flue pipe
Inside
2˚ downward Min.
Fig. 7
Inside
Spacer
2˚ downward Min.
Spacer
Fig. 8
Inside
2˚ downward Min.
Fig. 9
Outside
5- 3 / " to 9"
16
Outside
4" to 5- 3 / "
16
Outside
A
Arrow
Outer flue pipe flange
24