Toyostove Laser 30 Type B Installation And Operation Instructions Manual page 13

Laser clean heating system/vented heater
Hide thumbs Also See for Laser 30 Type B:
Table of Contents

Advertisement

5.
Clean Fuel Strainer (ONCE A MONTH)
The strainer of the fuel sump should be cleaned once a month and before
storing heater at the end of each season.
(a) Close the valve(s) of the separate fuel tank.
(b) To catch the fuel which will drain out, set the oil catch below the strainer
cover, with a small container under it.
(c) Loosen the two screws from the strainer cover and remove.
(d) Remove the strainer and wash with fuel.
(e) Return the strainer to its original position. Replace strainer cover and
screw to secure.
(f)
Wipe away any spilled fuel.
(g) Open the valve(s) of separate fuel tank. Check for fuel leakage.
Note:
Be sure to unscrew the drain screw to remove all remaining fuel
from the fuel sump at the end of each season.
The igniter cleaning mode prolongs the igniter life.
The heater will automatically clean igniter every day at 2:00 a.m. and display"CL" on digital indicator
if heater is running at that time.
To clean igniter heater will automatically stop at 2:00 a.m. andautomatically re-ignite and continue
burning again.
13
AUTOMATIC IGNITER CLEANING SYSTEM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Toyostove laser 30 type dLaser 30

Table of Contents