Advertisement
VLT® Control Panel LCP 23
Installation Guide
2.
Push the top of LCP 23 into place, see
Illustration 1: Positioning the Bottom of LCP 23
1.5 Dismounting the LCP 23
Procedure
1.
Push the top of LCP 23 to the opposite direction of the drive, see
2.
Pull up and take down the LCP 23 from the drive, see
Illustration 3: Pushing the Top of LCP 23
Danfoss A/S
Ulsnaes 1
DK-6300 Graasten
vlt-drives.danfoss.com
Danfoss can accept no responsibility for possible errors in catalogs, brochures, and other printed material. Danfoss reserves the right to alter its products without notice.
This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already
agreed. All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
2 | Danfoss A/S © 2022.11
Illustration
2.
Illustration 2: Pushing the Top of LCP 23 into Place
Illustration
Illustration
4.
Illustration 4: Pulling Up the LCP 23
*130R1273*
*M0037901*
Introduction and Installation
3.
AN425137357164en-000101 / 130R1273
Advertisement
