Advertisement
Available languages
Available languages
wheels, pushing in the direction of the arrow.
2 OPENING: Lift the seat (fig_a), press the side buttons
(fig_b) and open the high chair (fig_c).
3 BRAKE: the wheels of the high chair are fitted with
brakes. To apply the brakes, lower the levers on
the wheels. To release them, raise the levers. It is
recommended that you apply the brakes before
carrying out any procedures involving the high chair.
4 TRAY: To fit the tray, pull the central lever underneath
it towards you while at the same time pushing it all
the way into the armrests (fig_a). To extend or remove
the tray, pull the central lever underneath it towards
you (fig_b) and move it outwards (fig_c). To remove
the tray, pull the side levers outwards and pull the tray
towards you. The high chair has a double tray. The top
tray can be easily washed in a dishwasher. To remove it,
detach it from the lower tray and lift it up (fig. d).
5 ADJUSTING THE HEIGHT: The chair can be set at 7
different heights. To raise or lower the chair, press
the two side levers (fig_a) and stop in the required
position. The handle under the netting can also
be used to raise the seat (fig_b). The height can be
adjusted in these ways with the child in the high chair.
RECLINING BACKREST: The seat can be reclined in 5
positions. To adjust it, raise the handle behind the
backrest (fig. c) and lock it in the required position.
This can also be done with the child in the high chair.
6 ADJUSTABLE FOOTREST: The footrest can be set in 3
positions. To raise it, push it upwards. To lower it, push
in the two levers and move the footrest down (fig_b).
7 FIVE-POINT SAFETY HARNESS: To fasten the safety harness,
push the two waist strap buckles (with the shoulder straps
attached) into the leg divider until they click into position
(fig_a). To release it, press the center of the buckle while
pulling the waist strap outwards (fig_b). To tighten the
waist strap, pull the ends on both sides. To loosen it, do
the opposite.
8 The shoulder straps of the harness can be set at two
different heights. Partially remove the fabric covering
(fig_a), release the shoulder straps from the backrest
(fig_b) and pull them out from the fabric covering.
Insert the ends of the shoulder straps in the other
slots in the fabric covering and the backrest (fig_c),
then put the fabric covering back into the right
position on the backrest.
9 USE WITHOUT THE TRAY: to use the seat at the table,
remove the tray. To clip the tray on the rear supports
of the high chair, align and engage it with the
attachments (fig_b).
10 CLOSING AND REOPENING THE TRAY: Pull the central
lever underneath the tray towards you (fig_a) and
extend it as far as the red markers (fig_b), then swing
it upwards to lock it in place (fig_c). To reopen the
tray, press the lever under the armrest (fig_d), swing
it downwards, then pull the central lever towards you
and put the tray in one of the positions for use.
11 FOLDING UP: Press the side buttons (fig_a) and fold
up the high chair (fig_b). Fig_c shows a folded-up
high chair.
12 REMOVABLE COVERS: To remove the covers of the
seat, pull off the upper part of the fabric covering and
pull the harness straps through the backrest (fig_a)
and the fabric covering (fig_b). Lower the backrest
and pull out the leg divider strap from under the seat
(fig_c).
13 Unbutton the sack at the sides (fig. a) and pull up to
remove it (fig. b).
14 RECLINER CONFIGURATION: - Remove the tray. -
recline the backrest to the 3/4/5 position (fig_a) - lift
the footrest (fig_b) - the recliner's height can be
adjusted as needed (fig_c).
SERIAL NUMBERS.
15 Information about the production date of the Prima
Prima Follow me can be found on the seat.
_ Product name, date of manufacture and serial
number.
This information is required for any complaints.
THE ORIGINAL ACCESSORY
PEGPEREGO
PegPerego accessories are designed as a useful,
practical means of simplifying the lives of parents.
Discover all your product's accessories on
www.pegperego.com
CLEANING AND MAINTENANCE
Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place. The maintenance have to be
regularly.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil all metallic moving parts. Check all nuts
and bolts for tightness and tighten when required.
check all coverings for bolts and sharp edges and
replace when required. check swing seat and
attachments for evidence of deterioration. Replace
when required in accordance with the manufacturer's
instructions.
CLEANING THE SACK: When washing, closely follow
the instructions stated on the label sewn into the
cover. Wash with a damp cloth and neutral detergent.
Do not wring. Do not use chlorine bleach. Do not
iron. Do not dry clean. Do not use solvents for stain
removal. Do not spin dry.
PEGPEREGO S.p.A.
PegPerego SpA adopts a quality management system
certified by TÜV Italia Srl in accordance with the ISO
9001 standard. PegPerego can make changes at any
time to the models described in this publication for
technical or commercial reasons.
PEGPEREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine PegPerego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
PegPerego Assistance Service and state the serial
number of the product.
tel. 0039/039/60.88.213
e-mail: customer.service@pegperego.com
website www.pegperego.com
All intellectual property rights on the contents of this
manual are property of PegPerego S.p.A. and are
protected by the laws in force.
- 10 -
Advertisement
