Panasonic EYFLF1XC Service Manual page 5

3.2. Trial Operation (after checking Troubleshooting Guide).
Note:
・If you have any questions regarding the operation, please refer to the Instruction Manual for clarification.
the unit does not operate as described in the Instruction Manual, reassemble the unit and check for any faulty assembly or
・If
.
missing parts
【 Method of confirmation 】
1. Press the D button on the wireless remote control once.
2
. Confirm that the identification of the main unit is displayed on the operation panel display.
【 Initializing all settings (revert settings to factory defaults 】
Refer to the instruction manual of Initializing all settings section.
3.2.4 Integrity
•
With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.
•Verify that there is no dirt, scratching, or other damage on the tool's exterior from the repair process.
5