Dvd And Video Cd Operation; Playing Dvd And Video Cd; General Features; Moving To Another Title - Toshiba SD-V55HT Owner's Manual

DVD and Video CD Operation

Playing DVD and Video CD

Playback Setup
DVD
Turn on the TV and select the video input source connected
to the DVD/VCR Receiver.
Audio system: Turn on the audio system and select the input
source connected to the DVD/VCR Receiver.
Set the Output Source to DVD as shown in "Selecting the
Input/Output Source" on page 15.
1 1
Press OPEN/CLOSE (0 0 ) to open the disc tray.
2 2
Load your chosen disc in the tray, with the label
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
3 3
Press OPEN/CLOSE (0 0 ) to close the tray.
"READING" appears in the display window, and
playback starts automatically. If playback does not
start, press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
A menu screen may appear automatically after loading a
DVD.
DVD
Use b/B/v/V buttons to select the title/chapter you
want to view, then press ENTER to start
playback.
Press TOP MENU or DISC MENU to return to the menu
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
22.
otes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized
(see Parental Control, on page 23).
DVDs may have a Region Code.
Your DVD/VCR Receiver will not play discs that have
a Region Code different from your DVD/VCR
Receiver. The Region Code for this DVD/VCR
Receiver is 1 (one).
Do not keep a fixed image displayed on the screen
for a long time.
30
VCD2.0 VCD1.1

General Features

ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Moving to another TITLE

1/3
DVD
If a disc has more than one title, you can move to
another title as follows:
Press DISPLAY, then press the appropriate number
buttons (0-9) to select a title number.

Moving to another CHAPTER/TRACK

VCD1.1
DVD
VCD2.0
If a title on a disc has more than one chapter or a disc
has more than one track, you can move to another
chapter/track as follows:
Press SKIP . or > briefly during playback to
return to the beginning of the current chapter/track or
to select the next chapter/track.
Press SKIP . twice in quick succession to step
back to the previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Use v v /V V to select Chapter/track icon.
Then, enter the chapter/track number with the number
buttons (0-9).
ote
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.

Slow Motion

DVD
1 Press SLOW during playback or still mode.
The player will enter SLOW mode.
2 Use SKIP . or > (or SLOW) to select the
required speed:
t 1/16, t 1/8, t 1/4, t 1/2 (backward), or
T 1/16, T 1/8, T 1/4, T 1/2 (forward).
3 To return to playback, press PLAY.
ote
Slow motion playback in reverse is not applicable for
Video CD.
Still Picture and Frame-by-Frame
Playback
DVD VCD2.0
1 Press PAUSE/STEP during playback.
The DVD/VCR Receiver will go into PAUSE mode.
2 You can advance the picture frame by frame by
pressing PAUSE/STEP repeatedly on the remote con-
trol.
3 To return to playback, press PLAY.
1/12 1/3
VCD2.0 VCD1.1
VCD1.1