Rear Panel - Toshiba SD-V55HT Owner's Manual

Dvd/vcr home theater system
Hide thumbs Also See for SD-V55HT:
Table of Contents

Advertisement

Rear Panel

VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
AC Power Cord
Plug into the power source.
Connect to a TV with RF coaxial inputs.
Connect to a S-Video Input on TV. FOR DVD VIEWING ONLY.
Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
Remote Control Operation Range
Point the remote control at the remote sensor and press
the buttons.
Distance: About 7m (23ft) from the front of the
remote sensor
Angle: About 30° in each direction of the front of the
remote sensor
IMPORTANT NOTE:
SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF IN A SAFE MANNER IN COMPLIANCE
WITH ALL APPLICABLE LAWS.
FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.
10
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs. FOR DVD
VIEWING ONLY.
RF.OUT (DVD/VCR OUT)
S-VIDEO OUT (DVD OUT)
Connect the six supplied speakers to these terminals.
Connect to a digital audio output on a digital device.
Remote control battery installation
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
ANT.IN
Connect the VHF/UHF/CATV
antenna to this terminal.
SPEAKER Connectors
DIGITAL AUDIO IN (OPTICAL)
AM Antenna Connectors
Connect the AM antenna to this terminal.
FM Antenna Connectors
Connect the FM antenna to this terminal.
Detach the battery cover on the rear of
the remote control, and insert two R03
(size AAA) batteries with
aligned correctly.
Caution
and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents