Advertisement
OPERATIONAL COMPONENTS
The following items are required for the installation but are not supplied by Rinnai UK. These
items are common and can be obtained through any merchants or hardware store.
3 Core Flex 1.5mm 5amp rated (length to be determined by installer)
Fixing screws and wall plugs to mount Pure Controller
Remove front panel of Pure Controller
With a flat head screwdriver pull down the catch
circled in FIG 1 and remove the controller body
Locate the knock out holes on the controller
housing (FIG 2) and proceed to make holes for
fixing screws
Place the controller in desired location near to
the heater(s) and mark out the holes to drill.
Drill the holes and fix the housing to the wall
using appropriate fixings (Fixings not supplied)
Installation Instructions
8
FIG 1
FIG 2
Advertisement
