Advertisement
5.
Set a unique device ID and MAC address (1-127) for the PURE controller. These needs to be differ-
ent than any other products on the network. The correct baud rate will also need to be set to en-
sure the communications operate correctly.
6.
Once all the above have been set, use the left hand buttons to highlight 'return to previous' and
select with the top right button to cycle out of the screens.
7.
When prompted, ensure that all changes are saved when exiting the settings. Select 'Yes' via the
top right button.
Programing Instructions
CCI Settings
Device ID
0000000
MAC
050
Baud
38400
Location
unknown
Model
CCITP1203F
Firmware
4.24
Software
PURE1.0
Return to previous
17
Advertisement
