Table of Contents
Advertisement
Turning the Power On/Off
When the power is turned on, the camera is initiated with a different mode depending on
whether the lens cover has been opened or closed.
Before starting
Load the battery and insert the SD card. See "Inserting and Removing the SD Card"
page 18, "Loading and Unloading the Battery"
tery"
page 20
Turning the power on
Slide the POWER switch in the arrow direction.
POWER
Notes
• If no operation is performed for the preset period of time with the power on, the power will
be automatically turned off. For Auto Power Off,
• After the power is turned on, it may take several seconds to charge the flash. While the
flash is being charged, the indicator blinks orange. The camera is not yet ready for
photography during this period. Start photography after charging is completed.
To turn the power off
With the power is on, slide the POWER switch.
22
The indicator is lit orange and the camera is initiated.
The initial mode after the power is turned on differs
depending on the following situation:
With the lens cover opened
With the lens cover closed
With the PC connected
POWER switch
see page 63.
page 19 and "Charging the Bat-
: photography mode
: playback mode
: PC mode
page 54, 56
Advertisement
Table of Contents
