Table of Contents
Advertisement
Turning the Power On/Off
Turning the Power On
Make sure that the SmartMedia™ is correctly loaded. (➲ Page 31)
Press the POWER button to turn the power on.
When the camera is turned on, set the mode dial to the desired
mode.
Before photography, make sure that the lens cap has been
removed from the camera.
In the photography modes ([
extends from the camera body.
When the camera is turned on, the Auto Power OFF function
becomes operational.
IMPORTANT
• If no operation is carried out for a fixed amount of time (default: about 1 minute), the power is turned
off to preserve battery life. This is called "Auto Power OFF". To return to the normal state, press the
POWER button again.
About the Auto Power OFF Function ➲ Additional Information, "AUTO POWER OFF (page 110)"
Turning the Power Off
Press the POWER button to turn the power off.
The power turns off.
Attach the lens cap when you are not using the camera.
], [
] or [
]), the lens
- 38 -
Advertisement
Table of Contents
