Turning the Power ON/OFF
Turning the Power ON
Make sure that the SmartMedia™ is correctly loaded. (
Slide the POWER switch to turn on the power and set
the mode dial to the desired mode.
Remove the lens cap during photography.
In the [
body.
When the camera is turned ON, the Auto Power OFF function starts
to work.
IMPORTANT
• If no operation is carried out for a fixed amount of time (default: about 1 minute), the power is turned off
Turning the Power OFF
Slide the POWER switch to turn off the power.
The power is turned off, and the lens returns to its original position in
the body.
32
] or [
] modes, the lens extends from the camera
to prevent battery wear. This is called "Auto Power OFF".
About the Auto Power OFF Function
AUTO-OFF (page 82)
Page 28)