Connecting To The Pc - Toshiba PDR-T30 Instruction Manual

Connecting to the PC

By connecting this camera to the PC, you can transfer images recorded on SD card to the
PC in order to modify or send to another person through the Internet.
Connection Flow
For the operations of Windows or Macintosh, see the subsequent pages.
Install ACDSee
images on a PC. Use the supplied CD-ROM to install in the PC.
When using
Windows 2000,ME, XP
®
or Macintosh.
Use the supplied USB cable to make this connection.
Data can be destroyed if the power of this camera is cut while transferring
images (while the indicator light is red). Therefore please use the AC adaptor
when connecting this camera with the PC and please do not take the USB
cable off or open the battery/SD card cover while transferring images.
Minimum System Requirements
A PC to be connected with this camera must satisfy the following requirements. Before
making a connection, check that all the items have been satisfied.
CPU
Pentium
Windows
OS
Pre-installed PC
Memory
Free space on
hard disk
Color monitor
Necessary devices
When using Mac OS 9.0 or 9.1, you need to install CarbonLib 1.3 or later.
You can download the program from the web site of Apple Computer, Inc.
*This does not assure that all PCs with the minimum requirements will connect properly.
Install ACDSee
TM
is a software application for viewing photographed
Connect this camera to the PC.
Windows PC
®
processor or higher
® 98/ 2000/ ME/ XP
(Additional space necessary to store images.)
256 colors, 800 x 600 dots min., (32,000 colors or more recommended)
CD-ROM drive, USB port
TM
.
Install the USB driver.
When using Windows
cable requires the installation of this
driver.
Macintosh
Power PC G3 processor 266 MHz or
higher
Mac OS 9.0 or later
(Mac OS 9.2 or later recommended)
Mac OSX 10.1 or later
(Mac OS 10.1.3 or later recommended)
64 MB or more
20 MB or more
98 the USB
®
53