Troubleshooting; Customer Service - NEFF I25CBS8W0 Series User Manual And Installation Instructions

1. Remove the cover.
2. Remove the empty batteries.
3.
Insert the new batteries (3 V CR 2032).
11 Troubleshooting
T r o u bl e s h o o t i n g
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
→ "Customer Service", Page 14
11.1 Malfunctions
Fault
The appliance is not
working.
The lighting does not
1
work.
Remote control not
working.
In the LED display,
the LEDs flash one to
five times after the
appliance is switched
off.
The lighting automat-
ically switches on as
soon as the appli-
ance is connected to
the power supply.
1
Depending on the appliance specifications
⁠
Cause and troubleshooting
The mains plug of the power cord is not plugged in.
▶
Connect the appliance to the power supply.
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
Different causes are possible.
▶
Call
→ "Customer Service", Page 14.
▶
Defective LED lights may be replaced by the manufacturer, their customer service or a
qualified technician (electrician) only.
The batteries are flat.
▶
→ "Replacing the batteries in the remote control", Page 12
The batteries are almost empty.
▶
→ "Replacing the batteries in the remote control", Page 12
Demo mode is switched on.
▶
To deactivate demo mode, press and hold
4. Close the cover. ⁠
5. Dispose of the empty batteries in an environmentally
friendly manner.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord of this appliance is damaged, it
must be replaced by trained specialist staff.
and for approx. 3 seconds.
Troubleshooting en
13