Download
Share
Print this page
  1. Manuals
  2. Brands
  3. iSolution Manuals
  4. DJ Equipment
  5. COLOR BAR 12TC
  6. User manual

iSolution COLOR BAR 12TC User Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
COLOR BAR 12TC
CB-12TC
User Guide
Professional Entertainment Technology

Advertisement

loading
Need help?

Need help?

Do you have a question about the COLOR BAR 12TC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for iSolution COLOR BAR 12TC

Summary of Contents for iSolution COLOR BAR 12TC

  • Page 1 COLOR BAR 12TC CB-12TC User Guide Professional Entertainment Technology...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. Safety Instruction 2. Technical Specification 3. How To Set The Unit 4. How To Control The Unit 5. Troubleshooting 6. Fixture Cleaning...

  • Page 3: Safety Instruction

    1. Safety Instruction Please read carefully the instruction, which includes important information about the installation, usage and maintenance. WARNING  Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. ...

  • Page 4: Technical Specification

    Caution There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer. Installation The unit should be mounted via its metal hole on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating.

  • Page 5: How To Set The Unit

    3. How To Set The Unit 3.1 Control Panel ○ 1 Display：To show the various menus and the selected functions LED： ○ DMX input present 2 DMX ○ Master Mode 3 MASTER ○ Slave Mode 4 SLAVE ○ Flashing Sound activation 5 SOUND Button ○...
  • Page 6 ○ 1 3DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal ○ 1 4DMX output: For DMX512 link, use 3/5-pin XLR plug cable to link the next unit. ○ 1 5Mains input: Connect to supply mains power. ○...
  • Page 8 DMX Address Press the MENU button up to when the DMX Address is showing on the display. Press ENTER button and the display will blink. Use DOWN and UP button to change the DMX512 address. Once the address has been selected, press the ENTER button to store. Back to the main functions without any change press the MENU button (or wait for 1 minute to exit menu mode).
  • Page 9 Sound State Press the MENU button up to when the Sound State is showing on the display. Press ENTER button and the display will blink. Use DOWN and UP button to select the on (sound control on) or off (sound control off) mode. Once selected, press the ENTER button to store. Back to the main functions without any change press the MENU button (or wait for 1 minute to exit menu mode).

  • Page 10: How To Control The Unit

    Press the MENU button up to when the White Balance is showing on the display. Press ENTER button and the r 255 will blink, press UP and Down button to adjust the value, press ENTER button to store and g 255 will blink on the display, press UP and Down button to adjust the value, press ENTER button to store and b 255 will blink on the display, press UP and Down button to adjust the value, and press ENTER button to store.
  • Page 11 want an instant show. 2-light show In slave mode, slave 1 means the unit run as the master unit and slave 2 means 2-light show. In order to create a great light show, you can set slave 2 on the second unit to get contrast movement to each other, even if you have two units only.
  • Page 12 15 channels 4.4 DMX 512 Configuration Front View: DMX Configuration:...
  • Page 15 4.5 DMX512 Connection 1. If you using a controller with 5 pins DMX output, you need to use a 5 to 3 pin adapter-cable. 2. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.

  • Page 16: Troubleshooting

    5. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The unit does not work, no light and the fan does not work 1. Check the connection of power and main fuse. 2.

  • Page 17: Fixture Cleaning

    6. Fixture Cleaning The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics. ...

This manual is also suitable for:

Cb-12tc