Checking For Leaks - Klarstein TOMAHAWK 4.2 SBG Manual

EN
36
and shall be positioned or protected against direct penetration by any trickling water
(e.g. rain).
Make sure that the gas cylinder compartment (if any) is not obstructed, keep it ventilated
and clean.

CHECKING FOR LEAKS

• Make 2-3 fluid ounces of leak-detecting solution by mixing one part washing-up
liquid with 3 parts water.
• Ensure the control valve is "OFF".
• Connect the regulator to the cylinder and ON/OFF valve to the burner, ensure the
connections are secure then turn ON the gas.
• Brush the soapy solution onto the hose and all joints. If bubbles appear you have a
leak, which must be rectified before use.
• Retest after fixing the fault
• Turn OFF the gas at the cylinder after testing.
• If leakage is detected and cannot be rectified, do not attempt to cure leakage but
consult your gas dealer.