Fitting the filter cover
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
▶
Risk of injury when opening and closing the hinges.
Keep your hands away from the hinges.
▶
Open the hinges on the filter cover.
1.
25
2.
Mount the filter cover on the designated screws and
push it backwards/forwards depending on the key
hole opening into the narrow section.
Tighten the fastening screws on the hinges.
3.
Check whether the appliance frame is lying flush.
4.
5
Retighten the screws if necessary.
Insert the cable, depending on the appliance model
5.
A or B.
Note: The metal cover has sharp edges. Protect the
6.
filter cover against scratches.
Appliance variant A:
2
2
Appliance variant B:
7.
Fit the grease filters.
8.
To avoid causing damage, do not bend the grease
filters.
Swing the filter cover up and ensure that it engages.
9.
Installation instructions en
21