Advertisement
7. USING THE HOB
Before turning on the burners, make sure that the burner rings, caps and
pan stands have been fitted correctly.
In the ultrarapid burner, notch A must be aligned with pin B.
Pan stand C provided is intended for use with woks (Chinese pans).
Adapter D comes only with open Pan stands models and is intended for
use with small sized vessels.
Some models do not feature all accessories.
7.1 Ignition of the burners
For each knob the corresponding burner is indicated. The device is fit
with electronic ignition. Simply press and simultaneously turn the knob
counter-clockwise on the low point flame symbol, until the burner is
ignited. Concerning models with valves, push the knob for approximately
2 seconds in order to keep the flame burning and to activate the safety
device. The burner might go off when the knob is released. In this case
repeat the aforesaid operation keeping the knob pressed for more than 2
seconds.
Should the burners go off accidentally in the models with valves, a safety
device will trip after approximately 20 seconds to block the gas outlet
even if the tap is open.
34
Instructions for the user
Advertisement
