Quick User Guide; Controls And Programmes - Candy RP4 476BWMR/1-S Manual

8. QUICK USER GUIDE

This appliance automatically adjusts the
level of the water to the type and quantity of
washing. This system gives a reduction in
energy consumption and a saving in
washing times.
Program selection
Turn on the appliance and select the

required program.
Adjust the washing settings if necessary

and select the required options.
DRYING (WASHER-DRYERS only)
If you would like the drying cycle to
begin automatically after washing,
select the washing
required and select the drying cycle.
Or you can finish the wash and then
select the drying programme.
Press the programme start button.

The end of the programme will be

indicated by a message on the display
(on some models, all the indicator lights
on the stage will light up).
Turn off the appliance.

For any type of wash, see the program
table and follow the operating sequence
as indicated.
Technical data
Water pressure:
min 0.05 Mpa / max 0.8 Mpa
(0.05 MPa dispenses approximately 1 litre
of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp /
Supply voltage: See rating plate.
9. CONTROLS AND
programme
A SMART RING (programme
B PLAY/PAUSE button
C DELAY START button
D OPTIONS button
E SPECIAL PROGRAMMES button
F TEMPERATURE SELECTION
G SPIN SELECTION button
H STAIN
F+G CHILD LOCK
I Digital display
71
PROGRAMMES
selection ring)
button
LEVEL/ALTERNATIVE
PROGRAMME SELECTION/STEAM
LEVEL button