Basic Settings - AEG FSB42607Z User Manual

Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com

7. BASIC SETTINGS

You can configure the appliance by changing
basic settings according to your needs.
Number Settings
1 Water hardness
2 Rinse aid empty no‐
tification
3 End sound
4 Auto door open
5 Key tones
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode.
When the appliance is in setting mode, the
indicators on the control panel represent
available settings. For each setting, a
dedicated indicator flashes:
4 5
1 3
Values
From level 1 to level
10 (default: 5)
On (default)
Off
On
Off (default)
On (default)
Off
On (default)
Off
2
In your request, include the product number
code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Description 1)
Adjust the level of the water softener according to the
water hardness in your area.
Activate or deactivate the rinse aid indicator.
Activate or deactivate the acoustic signal for the end
of a programme.
Activate or deactivate the AirDry.
Activate or deactivate the sound of the buttons when
pressed.
7.1 Setting mode
How to enter setting mode
You can enter setting mode before starting a
programme. You cannot enter setting mode
while the programme is running.
To enter setting mode, press and hold
simultaneously
3 seconds.
• The light related to
indicator flash.
• The indicators
are on.
• The lights related to MY TIME
selection bar are on.
How to navigate in setting mode
You can navigate in setting mode using
MY TIME selection bar.
and for about
and the
, , and
ENGLISH 37