1. Manuals
  2. Brands
  3. AEG Manuals
  4. Dishwasher
  5. FSB32620Z
  6. User manual

AEG FSB32620Z User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FSB32620Z
USER
MANUAL
EN
User Manual
Dishwasher

Advertisement

Table of Contents
loading

Related Manuals for AEG FSB32620Z

Summary of Contents for AEG FSB32620Z

  • Page 1 FSB32620Z User Manual Dishwasher USER MANUAL...

  • Page 2: Table Of Contents

    14. ENVIRONMENTAL CONCERNS..............24 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...

  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 10 (1.0) bar (MPa) Follow the maximum number of 13 place settings. • If the supply cord is damaged, it must be replaced by •...
  • Page 5 ENGLISH • Do not use multi-plug adapters and • Do not store items or apply pressure extension cables. on the open door of the appliance. • Make sure not to cause damage to • The appliance can release hot steam the mains plug and to the mains if you open the door while a cable.

  • Page 6: Installation

    Centre to replace it with the new one. Refer to Safety chapters. 3.1 Building in www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 3.2 Safety caps If the furniture panel is not installed, open the appliance door carefully to avoid the risk of injury.

  • Page 7: Product Description

    ENGLISH 4. PRODUCT DESCRIPTION Upper spray arm Cutlery basket Lower spray arm Lower basket Filters Upper basket Rating plate The graphic is a general overview. For more details, Salt container refer to other chapters or Air vent documents provided with the Rinse aid dispenser appliance.

  • Page 8: Programmes

    5.1 Indicators Indicator Description Drying phase indicator. It is on when you select a programme with the dry‐ ing phase. It flashes when the drying phase operates. Salt indicator. It is on when the salt container needs refilling. It is always off while the programme operates.

  • Page 9: Settings

    ENGLISH 6.1 Consumption values Water Energy Duration 1)2) Programme (kWh) (min) 0.936 12.4 1.168 10.6 0.985 10.2 0.618 0.015 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. 2) The values for programmes other than ECO are indicative only.
  • Page 10 7.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
  • Page 11 ENGLISH 1. Wait until the indicator starts to Water softener lev‐ Amount of water flash, the indicator continues to flash and the remaining indicators are off. The intermittent flashing of the indicator In case of the high water softener setting, shows the current setting: e.g.
  • Page 12 3. Press the programme button to change the setting. 4. Press the on/off button to confirm the setting. 7.4 Acoustic signals Acoustic signals sound when a malfunction of the appliance occurs. It is not possible to deactivate these acoustic signals.

  • Page 13: Before First Use

    ENGLISH 8. BEFORE FIRST USE 1. Make sure that the current level of 4. Carefully shake the funnel by its the water softener agrees with the handle to get the last granules inside. hardness of the water supply. If 5. Remove the salt around the opening not, adjust the level of the water of the salt container.

  • Page 14: Daily Use

    3. Remove the spilled rinse aid with an You can turn the selector of absorbent cloth to prevent excessive the released quantity (B) foam formation. between position 1 (lowest 4. Close the lid. Make sure that the quantity) and position 4 or 6 release button locks into position.

  • Page 15: Hints And Tips

    ENGLISH Opening the door while the When you cancel the delay start, you have to set the programme again. appliance operates Cancelling the programme Opening the door while a programme is running stops the appliance. It may affect Press the on/off button for 3 seconds the energy consumption and the until the appliance is in programme programme duration.
  • Page 16 10.3 What to do if you want to • To prevent limescale buildup inside the appliance: stop using multi-tablets – Refill the salt container whenever necessary. Before you start to use separately – Use the recommended dosage of detergent, salt and rinse aid, complete the detergent and rinse aid.

  • Page 17: Care And Cleaning

    ENGLISH 10.6 Unloading the baskets • The filters are clean and correctly installed. 1. Let the tableware cool down before • The cap of the salt container is tight. you remove it from the appliance. Hot • The spray arms are not clogged. items can be easily damaged.
  • Page 18 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.

  • Page 19: Troubleshooting

    ENGLISH 11.5 Cleaning the lower spray 3. To install the spray arm back, press it downwards. We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. 1. To remove the lower spray arm, pull it upwards.
  • Page 20 Problem and alarm code Possible cause and solution You cannot activate the appliance. • Make sure that the mains plug is connected to the mains socket. • Make sure that there is no damaged fuse in the fuse box.
  • Page 21 ENGLISH Problem and alarm code Possible cause and solution The temperature of the water inside • Make sure that the temperature of the inlet wa‐ the appliance is too high or malfunc‐ ter does not exceed 60°C. tion of the temperature sensor occur‐ •...
  • Page 22 Problem and alarm code Possible cause and solution The appliance trips the circuit-beaker. • The amperage is insufficient to supply simulta‐ neously all the appliances in use. Check the socket amperage and the capacity of the me‐ ter or turn off one of the appliances in use.
  • Page 23 ENGLISH Problem Possible cause and solution The dishes are wet. • For the best drying performance activate the function AirDry. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty. •...

  • Page 24: Technical Information

    Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 220 - 240 Electrical connection...
  • Page 28 www.aeg.com/shop...

Table of Contents