Basic Settings - AEG FSK63607P User Manual

Consumption values
Programme 1)2)
Quick
1h
1h 30min
2h 40min
ECO
AUTO Sense
Machine Care
1)
The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of
dishes and the degree of soil can change the values.
2)
The values for programmes other than ECO are indicative only.
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com

7. BASIC SETTINGS

You can configure the appliance by changing basic settings according to your needs.
Number Setting
1 Water hardness
2 Rinse aid level
3 End sound
4 Auto door open
5 Key tones
6 Latest programme
selection
1)
For more details, refer to the information provided in this chapter.
You can change the basic settings in setting
mode.
12 ENGLISH
Water (l)
10.4
11.7
11.5
12.0
10.5
11.9
9.9
In your request, include the product number
code (PNC) from the rating plate.
For any other questions regarding your
dishwasher, refer to the service book
provided with your appliance.
Values
Description 1)
1L - 10L (default: Adjust the level of the water softener according to the
5L) water hardness in your area.
0A - 6A (default: 4A) Adjust the level of the rinse aid according to the nec‐
essary dosage.
On Activate or deactivate the acoustic signal for the end
Off (default) of a programme.
On (default) Activate or deactivate the AirDry.
Off
On (default) Activate or deactivate the sound of the buttons when
Off pressed.
On Enable or disable the automatic selection of the most
Off (default) recently used programme and options.
When the appliance is in setting mode, the
bars of the ECOMETER represent available
settings. For each setting, a dedicated bar of
the ECOMETER flashes.
Energy (kWh)
0.600
0.845
1.000
1.009
0.835
0.964
0.636
Duration (min)
30
60
90
160
240
170
60