Battery
Table 5-2
Battery description and part number
Description
Battery, 3 cell, 45 Wh
Before removing the battery, follow these steps:
1.
Prepare the computer for disassembly
2.
Place the computer in Battery Safe mode
3.
Remove the bottom cover
Remove the battery:
1.
Remove the two Phillips M2.0 × 4.0 screws (1) that secure the battery to the computer.
2.
Lift top (connector side) of the battery up to an approximate 45° angle (2), and then remove the battery
from the computer (3).
Reverse this procedure to install the battery.
(Preparation for disassembly on page
(Battery Safe mode on page
(Bottom cover on page
32).
Spare part number
L32656-005
31).
31).
Component replacement procedures
33