Table of Contents
Advertisement
8.4 Ethernet Test
Test preparation: a network cable
8.4.1 Ethernet-JP1 Port Network Test
After powering up, connect the network cable to the JP1 port and enter ifconfig to check whether the eth0 node has
acquired the IP address.
1) Execute the command
ping 110.242.68.66
to test the network connection.
Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China
10
Emai:
support@geniatech.com
Tel: (+ 86) 755 86028588
Advertisement
Table of Contents
