LEDS 3 2 1 0'. The DB8 drives three LEDs from the red, green and blue LED drive from power management IC PMI8996. The
fourth User LEDs is driven by the PMI8996 via PM MPP2.
Power indicator LED:
A blue LED is included to indicate the presence of input power to the DB8.
5.15 Expansion Connector
The 96Boards specification calls for two Expansion Connectors, a Low Speed and a High Speed.
The DB8 meets this requirement for low speed and exceeds it by having two high speed connectors, please review section
6 for detailed information regarding the Low Speed Expansion Connector and section 7 for detailed information regarding
the High Speed Expansion Connectors.
5.16 Additional Functionality
The 96Boards specifications allows for additional functionality provided that all mandatory functionality is available and
there is no impact on the physical footprint specifications including height and do not prevent the use of the 96Boards CE
low speed and high speed expansion facilities
The DB8 implements additional functions, which are listed in the following sub-chapters.
5.16.1 GPS
The GPS implementation is based on Qualcomm WGR7640 GNSS RF receiver (U5) supporting GPS, GLONASS and
COMPASS. The APQ8096 communicates directly with the WGR7640.
5.16.2 Ethernet Connector
Gigabit Ethernet is supported by Qualcomm AR8151 controller and uses an RJ45 as the physical interface.
5.16.3 Mini PCIE connector
The DB8 includes a mini PCIE (PCI express) connector. This enables integration of HW peripherals which are compliant to
the PCIE mini specification.
17