Table of Contents
Advertisement
15
RS232
17
GTIoT
8.2 Test Preparation：
Prepare a serial cable to connect the Debug port of the board to the PC, enter Device Manager->Ports of the PC to
check the port number recognized by the system. Open the terminal debugging tool, select the corresponding port
number and baud rate 115200.
Room 02-04, 10/F, Block A, Building 8, Shenzhen International Innovation Valley, Dashi Road, Nanshan District, Shenzhen, Guangdong, China
Emai:
support@geniatech.com
Tel: (+ 86) 755 86028588
16
LVDS
18
Mini PCIe--LTE module
7
Advertisement
Table of Contents
