DeWalt DCD791 Original Instructions Manual page 19

BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER, DCD791
BRUSHLESS CORDLESS COMPACT 13 mm
DRILL/DRIVER/HAMMERDRILL, DCD796
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level) dB(A)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
Screwdriving
Vibration emission value a
h,D
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WALT one of the
e
DCD791
V 18
DC
2/11
Li-Ion
min -1 0–550
min -1 0–2000
min -1 —
-1
min —
Nm 70/27
mm 1.5–13.0
mm 40
mm 13
mm —
kg 1.1
dB(A) 74
dB(A) 85
5
= m/s 2 <2.5
m/s 2 1.5
= m/s 2 —
m/s 2 —
= m/s 2 <2.5
m/s 2 1.5

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However if the
tool is used for different applications, with different accessories or
poorly maintained, the vibration and/or noise emission may differ.
This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration and/or
DCD796
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
18
This may significantly reduce the exposure level over the total
2/11
working period.
Li-Ion
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
0–550 and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
0–2000
EC‑Declaration of Conformity
0–9350
Machinery Directive
0–34000
70/27
1.5–13.0
Drill/Driver/Impact Drill
DCD791, DCD796
40
D WALT declares that these products described under
e
13
Technical Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-
13
1:2018+A11:2019.
1.2
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
88
file and makes this declaration on behalf of D
99
3
<2.5
Markus Rompel
1.5
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
10
65510, Idstein, Germany
29.11.2021
1.5
<2.5
1.5
EnGLIsH
WALT at
e
WALT.
e
19