Kogan KAMESHWFI6A User Manual page 46

FAQ
Q1. Why doesn't the login page appear after entering http://ap.setup?
• Ensure your computer is set to obtain IP address automatically.
• Ensure you have entered the URL correctly.
• Reboot your device and try again.
Q2. What can I do if I cannot access the Internet?
• Ensure your Internet works normally. please contact your ISP (Internet Service Provider)
if it doesn't.
• Open your browser, enter 192.168.10.1 or ap.setup, then follow the prompts.
• Reboot your device and try again.
Q3. What should I do if I can't have access to 192.168.10.1 or ap.setup on my android
device?
Disable your 4G signal first before you set up the network, then turn it on when the
configuration is complete.
Q4. What can I do if I forget my administration management password?
Reset the primary node by holding the reset button for 6 seconds. The default password is
"admin".
Q5. How do I find the best location for nodes?
Place the nodes in a relatively open space to avoid obstructions such as metal objects.
reinforced concrete walls etc.
Q6. Why is my flow monitoring inaccurate?
The Hardware NAT Settings default open status results in the absence of monitored data. If
you want to keep the flow monitoring accurate. You will need to disable the Hardware NAT
Settings function manually. This will increase the CPU usage.
Disposal
This marking indicates that this appliance should not be disposed with
other household wastes. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.