Internet Settings - Kogan KAMESHWFI6A User Manual

INTERNET SETTINGS

Generally, you complete the internet settings by following the quick setup wizard of the
Kogan Mesh App when you setup the nodes the first time. If your internet connection type
or parameters are changed, you can set them again here to enable your nodes to access
the internet. The nodes support the following four connection types.
• PPPoE: If this type is selected, you need to enter the PPPoE username and password
provided by your ISP for internet access.
• DHCP: If this type is selected, no parameter is required to enter. The node obtains the
dynamic IP address and other related parameters automatically from your ISP.
• Static IP Address: If this type is selected, you need to enter the static IP address and
other related parameters provided by your ISP for internet access.
• Bridge: If this type is selected, the node can access the internet only after being
connected to another router with internet accessibility in a wired configuration.
Tips:
If you set the Connection Type to Bridge, the Guest Network, Parental Control, Port
Forwarding, UPnP, DNS, QoS and DHCP server functions becomes unavailable.