KTM 450 XC-F 2018 Setup Instructions page 10

2 SETUP
8
(XC‑F US)
–
Position indicator lamp attachment
indicator lamp and fuel level warning lamp. Mount and
tighten screw
Guideline
Remaining screws,
chassis
–
Join plug-in connector
F01070-10
–
Join plug-in connector
–
Route the cable without tension and secure with cable tie.
–
Correctly mount the fuel tank breather.
–
Mount the handlebar cushion.
–
Install front fender. (
–
Install the front wheel. (
–
Install the start number plate. (
F01076-10
(SX‑F EU)
–
WARNING‑Apply sticker to the rear fender.
F01075-01
Left and right footrest (All SX‑F models)
–
Position the new footrest and pin.
Info
Only insert the pin to the extent that the spring can
still be mounted.
D00674-10
9
with malfunction
bk
.
M6 10 Nm (7.4 lbf ft)
bl
.
bm
.
p. 15)
p. 14)
p. 15)