Advertisement
Quick Links
Quick instruction
simalube IMPULSE installation, removal and disposal
simalube IMPULSE
with hose
Remove grease nipple
Remove connector
nipple
Fill hose completely with grease gun
© simatec 05.09.2023
Determine dispenser size and runtime
with „Calculation Pro"
(Calculation Pro is part of the app „simatec World of Maintenacne",
which is available as Android or iOS version)
Screw in reducing
nipple
(Seal thread with sealing tape or
other sealant)
Attach quick couplings to both
ends of the hose
Quick instruction - simalube IMPULSE installation, removal and disposal
simatec World of Maintenance
Screw in connector
nipple
(290-30110)
Remove prefill nipple
Clean lubrication point
Prelubricate the
lubrication point with
a grease gun
Screw in prefill nipple
(290-30110)
Attach hose to
lubrication point
and bracket
21.52.32-1
Advertisement
Related Manuals for simalube IMPULSE
Summary of Contents for simalube IMPULSE
- Page 1 Attach quick couplings to both Screw in prefill nipple nipple ends of the hose (290-30110) Fill hose completely with grease gun Remove prefill nipple Attach hose to lubrication point and bracket © simatec 05.09.2023 Quick instruction - simalube IMPULSE installation, removal and disposal 21.52.32-1...
- Page 2 Check correct position on dispenser IMPULSE is activated, of the dispenser LED flashes 2x green Regularly check simalube (Can be managed in the „simatec World of Maintenance“ app) © simatec 05.09.2023 Quick instruction - simalube IMPULSE installation, removal and disposal 21.52.32-2...
- Page 3 Insert new battery pack Check O-ring Screw on new dispenser, IMPULSE is activated, LED flashes 2x green Regularly check simalube (Can be managed in the „simatec World of Maintenance“ app) © simatec 05.09.2023 Quick instruction - simalube IMPULSE installation, removal and disposal 21.52.32-3...
Need help?
Do you have a question about the IMPULSE and is the answer not in the manual?
Questions and answers