Table of Contents
Advertisement
6 Pause (1)
To interrupt dise-pisy temporarily.
1. Touch " 1" to stop disc-play temporarily.
Tho " &"" mark is shown.
Touch the "ll" again to resume disc-
play. The " &\ " mark goes out.
2. Pause operation will not function when the
"tLGRd " or" d ISC " indicator is blinking
on the LCD display.
3. The "ll" is also used for memory func-
tion.
N
G
L.
|
S
H
ra)
Random (RANDOM)
CD changer selects mualc at random automatically.
@ The random circuit permits access to music on the discs in
any ordor, having randomly varying selection.
@ Touch "RANDOM" and the * &" mark is shown. The unit
will start to select music in any order at random.
During the random mode, the " L@Ad " indicator and disc/
track number will blink alternately while the disc/track is
being searched, until the disc is ready to play.
Display Selector (DISP)
To check the program piaying time.
@
Touch "DISP" to select display modes, either time counter or
disc/track numbers.
—19 —
7 Stop(™).
To atop tho diac-play.
1. During disc-play, touch
"®" to stop the
disc-play.
2. To
re-start
the disc-play,
touch
either
"MEMO >" or "P". Disc-play will continue
from the previously stopped portion of the
music (if there is no memory).
Radio Monitor
(R - M)
i reaume the radio or the tape playback.
@ During disc-play, if you resume to the radio mode,
touch "R+M" once. The display will change to the ra-
dio mode and the radio will be heard.
@ The random disc-play mode will stop when "", "MEMO
>", "Bm, "DISC Vv " or "DISC A " is touched. The "& "
mark goes out.
random mode.
Scan (PP)
tg
{3g
ao!
The left-side will
blink ten times. -
Blinking
Blinks several
times
m= When the desired song is reached and you want to
keep it, touch "PPI" or "Pm". The scan operation will
stop and disc-play starts from that position.
= During "MEMO
»" mode, only the programmed
songs can be scanned one by one.
= Scan will not operate at RANDOM mode.
Advertisement
Table of Contents
