Main Board - Sony HCD-G2BNiP Service Manual

2-7.

MAIN BOARD

Note 1: Refer to "WIRE SETTING" on page 9 for wire setting.
(G2BNiP)
qs flexible flat cable (8 core) (CN408)
qa flexible flat cable (9 core) (CN407)
Note 4: Both the flexible flat cable (9 core) can be
connected with the CN406 or CN407 on
MAIN board. When you connect the flexible
flat cable (9 core) with the CN407 on MAIN
board so as not to connect it by mistake.
1 Lift up the coating clip.
B
0 connector
(CN805)
9 connector
(CN601)
1 Lift up the coating clip.
8 flexible flat cable (21 core) (CN402)
Note 3: Both the flexible flat cable (21 core) can be
connected with the CN401 or CN402 on
MAIN board. When you connect the flexible
flat cable (21 core) with the CN402 on MAIN
board so as not to connect it by mistake.
qd two screws
(BVTP3
qf two coating clips
qg MAIN board
2 connector
(CN701)
CN406
B
A
1 Lift up the coating clip.
7 flexible flat cable (19 core)
(CN404)
8)
3 connector
(CN803)
4 flexible flat cable (21 core) (CN401)
Note 2: Both the flexible flat cable (21 core) can be
connected with the CN401 or CN402 on
MAIN board. When you connect the flexible
A
flat cable (21 core) with the CN401 on MAIN
board so as not to connect it by mistake.
5 connector
(CN702)
6 flexible flat cable (15 core)
(CN403)
qd three screws
(BVTP3 8)
HCD-G2BNiP/G2NiP
Note 5: When you install the flexible
flat cable, please install them
correctly.
There is a possibility that this
machine damages when not
correctly installing it.
OK
Insert is straight to the interior
flexible flat
cable
connector
NG
Insert is incline
flexible flat
cable
connector
15