Directwire Loopback; Windows Audio Settings - ESI Neva Uno User Manual

24-bit / 192 khz usb-c audio interface with microphone preamp

Hide thumbs Also See for Neva Uno:

Table of Contents

ESI

Neva Uno

3.3 DirectWIRE Loopback

Neva Uno also provides a feature we call DirectWIRE Loopback, a quick, simple and efficient

solution to record or stream playback signals, no matter what audio applications you are using.

To open the related dialog, select the DirectWIRE > Loopback entry via the top menu of the control

panel software and the following window appears, showing the option to loop back signals from the

virtual playback channel 3 and 4 or from the hardware playback channel 1 and 2.

Neva Uno provides a virtual channel recording device as input channels 3 and 4.

By default (shown above on the left), the signal that can be recorded there is identical to the signal

played via the virtual playback device channel 3 and 4.

Alternatively (shown above on the right), the signal that can be recorded there is identical to the main

playback signal from channel 1 and 2, which is the same signal also sent out through the line output

and headphone outputs.

This makes it possible to record the playback internally. For instance, you can use it to playback any

audio signal in any application while you record it with a different software or you could record the

main master output signal on the same computer. There are many possible applications, i.e. you can

record what you are streaming online or you can save the output of a software synthesizer application.

Or you stream what you are doing in real time to the internet.

Via the Windows Sound control panel icon or by selecting File > Windows Audio Settings in our

control panel software, you can open these Playback and Recording dialogs:

Table of Contents