Table of Contents
Advertisement
O •
The supplied AC power adapter is compatible with power supplies of
100 to 240 V (a plug adapter may be needed for overseas use).
•
Do not use the AC power adapter or USB cable with other devices, as
this could cause malfunction.
•
Do not affi x labels or other objects to the battery. Failure to observe
this precaution could make it impossible to remove the battery from
the camera.
•
Do not short the battery terminals. The battery could overheat.
•
Read the cautions in "The Battery and Power Supply".
•
Use only genuine Fujifi lm rechargeable batteries designated for use
2
in this camera. Failure to observe this precaution could result in prod-
uct malfunction.
•
Do not remove the labels from the battery or attempt to split or peel
the outer casing.
•
The battery gradually loses its charge when not in use. Charge the
battery one or two days before use.
•
If the battery fails to hold a charge, it has reached the end of its
charging life and must be replaced.
•
Unplug the AC power adapter from the power outlet when it is not
in use.
•
If the battery is left for long periods without charging, you may fi nd
that its quality degrades or that it no longer holds a charge. Charge
the battery regularly.
•
Remove dirt from the battery terminals with a clean, dry cloth. Failure
to observe this precaution could prevent the battery from charging.
•
Note that charging times increase at low or high temperatures.
•
Selecting ON for Bluetooth/SMARTPHONE SETTING > Bluetooth
ON/OFF in the network/USB settings menu increases the drain on
the battery.
N •
If the camera is turned on during charging,
charging will end and the USB connection
will instead be used to power the camera.
The battery level will begin to gradually
decline (P 328).
•
The camera will display a "power supply" icon when powered via USB.
52
Advertisement
Table of Contents
