Recovery Mode To Upgrade Device Firmware - Kiloview N6 User Manual

N6/N5 for NDI·User Manuel

10.5 Recovery mode to upgrade device firmware

If you cannot access the N6/N5 management background using the method described in
9.2, you can use Recovery mode to upgrade the firmware, as follows:
Step 1: Prepare a USB flash drive and copy the firmware file downloaded from the
official website to the flash drive.
Step 2: Insert the USB flash drive into the N6/N5, after the device is powered on (about
2s), wait for the Kiloview logo to appear on the screen, long press and hold the key
for more than 10s until the device enters Recovery mode.
Step 3: Select "Recover from USB Device" with the directional button and press
confirm to start the upgrade.
Step 4: During the N6/N5 firmware upgrade, you will be prompted with "Updating!
Please keep the power on." (Do not power off).
Copyright © 2023 Kiloview Electronic Technology Co., Ltd. 38