User Guide - Kiloview N6 User Manual

N6/N5 for NDI·User Manuel

2 USER GUIDE

 Equipment installation and connection
Correctly connect the power supply, network cable and video input source, and the device
is powered on and started.
 Network connection and configuration
The easiest way is to connect the device to the network through a wired connection and
automatically obtain an IP address and DNS from the network without any setup of the
device. (The first time you log in or the first time you log in after restoring factory
settings, you must agree to the "License Agreement" pop-up, otherwise you will not
be able to pull the device's NDI stream service properly.)
 NDI pulling flow
NDI has an auto-discovery function. After the device is normally connected to the
network, it can use other tools that support NDI (such as Newtek studio monitor, OBS,
vMix) to automatically discover and pull its NDI video stream directly.
 NDI decoding
In the web page menu item, you can switch to the decoding function. The device can
automatically discover NDI sources within the same network segment and select one of
them to decode and output to the monitor for monitoring. You can also manually add NDI
sources across network segments or non-default group names for decoding output.
Copyright © 2023 Kiloview Electronic Technology Co., Ltd. 5