Advertisement
INACTIVITY
During periods of inactivity, take the following precautions:
- disconnect the appliance from the power supply;
- preferably rub a soft cloth lightly dampened with mineral oil on all stain-
less steel surfaces;
Before reusing the appliance:
- clean the appliance and its accessories thoroughly (see section "
" on page
nance
- reconnect the appliance to the power supply;
- inspect the appliance.
AFTER-SALES ASSISTANCE
In the event of a fault, disconnect the appliance from the power supply and
contact the manufacturer.
CERTIFICATION
EU declaration of conformity for electrical appliances
Manufacturer: UNOX S.p.A.
Address: Via Majorana, 22 - 35010 Cadoneghe, Padua, Italy
declares, under its own responsibility, that the product
EVEREO™
complies with the Machinery Directive 2006/42/EC through the following
standards:
EN 60335-1: 2014 + A11:2014
EN 60335-2-42: 2003 + A1: 2008 + A11:2012
EN62233: 2008
EN 60335-2-102:2006 + A1:2010
complies with the Electromagnetic Compatibility Directive 2014/30/EC
through the following standards:
EN 55014-1: 2006 + A1: 2009 + A2: 2011
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2008
EN 61000-3-11: 2000
EN 61000-3-12: 2011
EN 61000-6-2: 2005
EN 61000-6-3: 2007
WARRANTY
This product must only be installed by a support service authorised by the
manufacturer. The installation date and appliance model must be documented
by the end purchaser, by means of written confirmation or an installation invoice
issued by the dealer or a support service authorised by the manufacturer.
The manufacturer's warranty covers all malfunctions objectively linked to
production defects. The warranty excludes damage due to transport, poor
product storage or holding, and incorrect product use. Also excluded is damage
76
);
74
Mainte-
Advertisement
