NETGEAR M4250 Series Configuration page 8

Hide thumbs Also See for M4250 Series:

Table of Contents

MRP Setting: From the Switching -> MRP tab. verify the MRP configuration Shows MVRP, MMRP, and MSRP modes

as enabled. Max fan in ports set to a default value of 0.

MRP Timers: From the Advanced->MRP Port Settings, verify Join, Leave, and Leave All timers are at Biamp settings.

Join 20, Leave 500, and Leave All 2500

Note: Default MSRP Leave Timer updated to 500cs / 5000ms to improve compatibility for large AVB networks.

http://support.biamp.com/

Table of Contents

Nms-ng26gpx-avb M4250-26g4xf-poe+