NETGEAR M4250 Series Configuration page 2

• Switches are certified by the Avnu Alliance for AVB support.
• Dedicated AV web-based GUI interface that allows the application of port-based profiles for different AV
protocols to simplify switch configuration for different supported AV protocols.
• Dedicated console (serial and USB) and out-of-band network ports for configuration and management
• Support for up to 256 AVB streams
• Out-of-box switches will be running a default Biamp config file that includes all the AVB profile settings for proper
operation using default VLAN 2 for AVB traffic.
• Spanning tree limits daisy chain/buss topologies to 7 switch hops. Biamp recommends max 6 switches in a plug-
and-play system not requiring additional configuration.
• Designs incorporating different switch models, or mixed networks, or VLANs will require design assistance from
Netgear.
• (24) 1G PoE+ ports, 240W total budget
• (2) standard 1G LAN ports
• (4) SFP + ports to support switch topology expansion.
• Fiber media converters are not supported for QT X controllers connected to SFP ports while running in AVB
configurations.
Notes:
• AVB license will be installed and activated on each switch when shipped.
• Netgear switches will be updated to the latest public firmware release.
• AVB is not supported over LAG.
Auto-trunk
Auto-Trunk provides an effortless ability to configure multiple VLANs onto an uplink Ethernet port or any unused
Ethernet port. By simply setting up the pre-configured network profile or VLANs on a specified port, the M4250
automatically configures the enabled, unused Ethernet port (preferably used for interconnect) to support all the VLANs
configured on the switch.
Copyright 2013-2020 Biamp Systems http://support.biamp.com/
2