Toro 79348 Manual page 20

Figure 26
1. Blower pulley
2. Blower in position (housing
portion removed for
illustrative purposes)
3. Spring
4. Idler-pulley post
2. Ensure that the belt remains aligned to the
blower pulley while you are installing the blower
assembly.
3. Pull the spring loaded idler pulley away from the
fixed spring post, and route the belt around the
mower deck pulley
Note:
Ensure that the belt is routed around the
blower pulley correctly.
4. Route the belt around the drive pulley as
illustrated in Figure 25
5. Install the powered bagger cover over the belt
cover, and secure it by tightening the knob
(Figure 27).
5. Idler arm
6. Drive pulley
7. Idler/tension pulley
8. Blower belt
(Figure 26).
and Figure 26.
1. Knob
2. Powered bagger cover
g201513
18
Figure 27
3. Belt cover
g201515