Toro 79348 Manual page 14

Figure 12
1. Nut
2. Existing hitch bracket
2. Install the stabilizer bracket to the rear guard
using 2 bolts (5/16 x 1 inch) and 2 locknuts (5/16
inch) as shown in
Figure 13
1. Locknut (5/16 inch)
2. Stabilizer bracket
3. Install the bagger mount bracket to the machine
as shown in Figure
3. Bolt
Figure 13.
3. Bolt (5/16 x 1 inch)
14.
g465961
1. Locknut (5/16 inch)
2. Bagger mount bracket
4. Install the bagger frame to the bagger mount
bracket using the long clevis pin and a hairpin
(Figure 15).
g462070
1. Clevis pin
2. Hairpin
5. Install the bent, flared end of a rod into the
keyed slot in the side of the machine frame, and
move the rod rearward to seat it in the frame
(Figure 16).
12
Figure 14
3. Bolt (5/16 x 1 inch)
Figure 15
3. Bagger frame
g462069
g462458