KTM 1190 RC8 R 2014 Setup Instructions page 13

3 WORK
3.10 Setting the clock with SET CLOCK
3.11 Adjusting the mapping of the engine electronics ENGINE MAP
Note
Material damage Incorrect mapping damages the engine.
–
Adjust the mapping of the engine electronics for the fuel quality currently in use.
Condition
The ignition is on.
The motorcycle is stationary.
–
Press the button
–
Press the button
–
Press the MODE button briefly.
The hour is shown.
–
Set the hour with the button
–
Press the MODE button briefly.
The minutes are shown.
–
Set the minutes with the button
400455-01
–
Press the MODE button briefly.
The settings are stored and the display changes to the SET‑UP menu.
–
Press the button
the info display.
–
Press the MODE button briefly.
Condition
The ignition is on.
The motorcycle is stationary.
Condition
ROAD mode
–
Press the MODE button briefly and repeatedly until ENGINE MAP appears in the
info display.
–
Press the MODE button for 3 - 5 seconds.
–
Select the mapping with the button
–
Press the MODE button for 3 - 5 seconds.
The setting is stored.
401134-01
Condition
RACE mode
–
Press the MODE button briefly and repeatedly until ENGINE MAP appears in the
info display.
–
Press the MODE button for 3 - 5 seconds.
–
Select the mapping with the button
–
Press the MODE button for 3 - 5 seconds.
The setting is stored.
401148-01
and the button for 3 - 5 seconds.
once until the symbol shows SET CLOCK in the info display.
or the button
or the button
briefly and repeatedly until the symbol
or the button
or the button
.
.
shows EXIT SETUP in
.
.
11