Table of Contents
Advertisement
6.5.5
Slow speed (P013)
For relay output Q2
Over speed setpoint shall indicate when the process speed of the target device has increased
past a safe working speed/rotation within the process. Enter the number of seconds between
pulses in an under speed situation.
• P013: xxx Seconds
Values
Run display features seconds between pulses for probe A and B and relay output status.
SITRANS WM300 MFA
Operating Instructions, 11/2021, A5E45090709-AC
Setpoint 00:00:xx (HH:MM:SS)
range 0 ... 399s then resets back to 0
Input I4 – Over speed alarm output relay Q2
Parameter assignment
6.5 Slow speed
37
Advertisement
Table of Contents
