Operating The Appliance; Switching The Appliance On And Off; Setting The Type Of Heating And Temperature; Temperature Display - NEFF B5ACM7H 0B Series Instruction Manual

1Operating the appliance

Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to apply settings on
your appliance.

Switching the appliance on and off

Use the function selector to switch the appliance on or
off. Turning the function selector to any position other
than the "Off" position switches on the appliance. To
switch off the appliance, always turn the function
selector to the "Off" position.

Setting the type of heating and temperature

It is very easy to use the function and temperature
selector to make settings for your appliance. To find out
which type of heating is best for which type of food,
refer to the beginning of the instruction manual.
Example in the picture: CircoTherm Hot Air ‚ at
160 °C.
Use the function selector to set the type of heating.
1.
Use the temperature selector to set the temperature
2.
or grill setting.
The appliance starts to heat up after a few seconds.
Note: If œ flashes in the display, the temperature in the
cooking compartment is too high for the selected
operating mode. Switch the appliance off, wait until it
has cooled down and then switch it back on again.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Note: You can set both a cooking time and an end time
on the appliance. ~ "Time-setting options" on page 14
Changing
The heating function and temperature can be changed
at any time using the relevant selector.
If you change the heating function, the temperature will
be changed to the corresponding default value.

Temperature display

As soon as the appliance heats up, the / symbol
appears in the display. The lines are filled from the
bottom to the top as the cooking compartment heats
up.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
when the / symbol first goes out.
Appliance heats up (fig.
■
Temperature has been reached (fig.
■
Residual heat
When the appliance is switched off, the temperature
indicator shows the residual heat in the cooking
compartment. The lower the temperature drops, the
less the indicator is filled.
Notes
The temperature indicator only shows the increasing
■
temperature for types of heating for which a
temperature is set. With cleaning functions, for
example, it is filled immediately.
Due to thermal inertia, the temperature displayed
■
may be slightly different to the actual temperature
inside the cooking compartment.

Rapid heating

With Rapid heating, you can shorten the heat-up time.
Suitable heating functions include:
‚ CircoTherm hot air
■
... Bread-baking setting
■
ƒ Top/bottom heating
■
Only use rapid heating when a temperature of over
100 °C has been selected.
To achieve an even cooking result, do not place your
food into the cooking compartment until rapid heating is
complete.
Set the type of heating and temperature.
1.
Touch the ° button.
2.
The / symbol appears in the display, and the
% arrows are filled from the bottom to the top.
The oven starts to heat up after a few seconds.
Once rapid heating is complete, an audible signal
sounds and the ° symbol goes out. Place your food in
the cooking compartment.
Operating the appliance
! )
" )
en
13