Advertisement
mode.
•
EXCEPTIONAL C.: The batteries are in exceptional charging
mode.
Screen 0.2
This screen shows the device's serial number.
Screen 0.3
This screen shows the device's software version.
9.3.2. 'Measurements' menu.
To access this menu from the home screen, press the forward
key () once. Use key () to access the screens of the different
sub-menus and move freely from one to the other by means of
keys () and ().
Screen 1.1
Main screen of the measurements menu.
Screen 1.2
This shows the device's output voltage and current.
Screen 1.3
This shows the voltage and current of the batteries.
Screen 1.4
This screen shows the charge level of the batteries in Ah.
Screen 1.5
This screen shows the RMS value of the voltage between phase
and neutral R-N.
Screen 1.6
This indicates the frequency value of the device's input voltage.
Screen 1.7
This displays the heat sink (HS) and battery (BATT) tempera-
tures in °C.
x x x.x V x x x.x A
BATT. FLOAT
Screen 0.1
* MEASUREMENTS *
Screen 1.1
(1)
* SWITCHING *
Screen 2.1
SALICRU
SERIAL NUMBER
SW VERSIONS
x x x x x x x x x x
FW: x x APP: x x
Screen 0.2
OUTPUT
x x x.x V x x x.x A
x x x.x V x x x.x A
Screen 1.2
INPUT FREQ
TEMPERATURES ºC
x x.x Hz
DIS: x x BAT: x x
Screen 1.6
(1)
FORCED QUICK
CHARGING: YES
Screen 2.2
9.3.3. 'Switching' menu.
To access this menu from the home screen, press the forward
key () twice. Use key () to access the screens of the different
sub-menus and move freely from one to the other by means of
keys () and ().
Screen 2.1
This is the gateway to the device's switching menu.
Screen 2.2
Manual and forced activation of fast charging.
9.3.4. 'User Parameters' menu.
To access this menu from the home screen, press the forward
key () three times. Use key () to access the screens of the
different sub-menus and move freely from one to the other by
means of keys () and ().
Screen 3.1
This is the gateway to the User Parameters menu.
Screen 3.2
Selection of the language of the display messages from among:
Spanish, Catalan and English.
Screen 3.3
This shows the address and speed of the MODBUS protocol.
9.3.5. 'Alarms' menu
To access this menu from the home screen, press the forward
key () four times. Use key () to access the screens of the
different sub-menus and move freely from one to the other by
means of keys () and ().
Screen 4.1
This is the gateway to the device's Alarms menu.
Screen 4.2 ... 4.x
The device's active alarms are displayed (see alarm table 9).
Screen 0.3
BATTERY
BATTERY CHARGING
x x x Ah
Screen 1.3
Screen 1.7
INPUT VOLTAGE
RS: x x x.x V
Screen 1.4
Screen 1.5
(1)
23
Advertisement
